How to replace samsonite luggage wheels?

How to replace samsonite luggage wheels?

How to replace samsonite luggage wheels?



Replacing the wheels on your Samsonite luggage can extend the life of your travel companion and ensure smooth and effortless movement during your trips. In this article, we will guide you through the process of replacing Samsonite luggage wheels, providing you with step-by-step instructions and helpful tips to make the task easier.

Gather the necessary tools and materials

Before you begin replacing the wheels on your Samsonite luggage, make sure you have the following tools and materials:

– Screwdriver (Phillips or flathead, depending on the screws used)
– Pliers (optional, for removing stubborn screws)
– Allen wrench (if required for your specific luggage model)
– Scissors or utility knife (for removing any zip ties or cable ties)

– Replacement wheels (make sure they are compatible with your Samsonite luggage model)
– Screws (if not provided with the replacement wheels)
– Zip ties or cable ties (if required for your specific luggage model)

Remove the old wheels

To remove the old wheels from your Samsonite luggage, follow these steps:

1. Lay your luggage on a flat surface, ensuring stability.
2. Locate the screws holding the wheels in place. These are usually found on the bottom of the luggage near the wheel.
3. Use a screwdriver (Phillips or flathead) to remove the screws. If the screws are tight or difficult to remove, you can use pliers for extra grip.
4. Once the screws are removed, gently pull the old wheel away from the luggage. If the wheel is attached with additional clips or fasteners, carefully detach them using pliers or any other appropriate tool.

Install the replacement wheels

After removing the old wheels, it’s time to install the replacement wheels. Follow these steps:

1. Take one of the replacement wheels and align it with the wheel slot on the bottom of your Samsonite luggage.
2. Insert the screws provided with the replacement wheels into the holes on the wheel and through the corresponding holes on the luggage.
3. Use a screwdriver to tighten the screws, ensuring a secure fit. Be careful not to overtighten, as it may damage the wheel or the luggage.
4. Repeat the process for the remaining wheels, ensuring that they are all properly aligned and securely attached.

Test the new wheels

Once you have installed the replacement wheels, it’s essential to test them before using your Samsonite luggage. Follow these steps:

1. Place your luggage on a flat surface.
2. Gently push and pull the luggage to check if the new wheels rotate smoothly and provide easy maneuverability.
3. Ensure that all the wheels are functioning correctly and that there are no wobbling or misalignment issues.


Replacing the wheels on your Samsonite luggage is a relatively simple process that can be done with basic tools and materials. By following the steps outlined in this article, you can ensure that your luggage continues to serve you well on your future travels.


– Samsonite Official Website:
– Luggage Repair Guide: